Ghost Hexpander

What is the correct order for plugging in the saddle pickups for a six string bass?
B G D A E B = 1 2 3 4 5 6 or  E B G D A E =  1 2 3 4 5 6 and adjust the instrument input setting in your MIDI converter
Thu, 27 Aug, 2015 at 11:37 AM
Can I use my active pickups with the Hexpander?
Yes. In the standard Hexpander-only installation, the magnetic and acoustic/MIDI systems exist parallel to each other, but are not connected, so there's...
Thu, 27 Aug, 2015 at 11:38 AM
If there's no connection between the magnetic pickups and the Hexpander, how does the QuickSwitch mute the mag signal?
Add the Mag-to-Pin-7 harness, and connect the green wire to the tip lug of your 1/4" jack. This is where the mag and MIDI systems interface.
Thu, 27 Aug, 2015 at 11:39 AM
Do you make a MIDI bridge for 7 string guitars?
Many of our saddles that are made for 6 string bridges will also fit on 7-string bridges. If you do not find a 7-saddle set on our Web site, but see a saddl...
Thu, 27 Aug, 2015 at 11:40 AM
What if I am installing the ghost system into an instrument that does not have any magnetic pickups?
If you have an instrument with a metal bridge plate, it would be good practice to ground that plate rather than leave it floating. Because the bridge is a b...
Thu, 27 Aug, 2015 at 11:41 AM
Can the ghost system be used with other manufacturer's components?
Yes, many piezo technologies are similar enough that they will interface successfully. Often the biggest difficulty is getting parts from different manufact...
Thu, 27 Aug, 2015 at 11:42 AM